Latest bagasse handling machine Tenders | Government bagasse handling machine Tenders

CTN :43529234

13 Jan, 2026 NA

Bhatgaon - Chhattisgarh

Tender For providing of goods and transport service for over dimensional cargo (odc) - ground support equipment - ground power unit, qty-01; any trailer suitable to transport ground support equipment, ground power unit, qty- 01 as per dimensions mentioned in atc document; a..

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

CTN :43497866

19 Jan, 2026 95.93 Lacs

Jaipur - Rajasthan

Tender For work of installing sports equipment in various parks of murlipura, vidyadhar nagar and jhotwara zone. (arc) - double arch swing: in this two children can enjoy the swing at one time.the arch shaped side frame is made of 65mm nb b class gi pipe and top pipe is made up of 50mm nb b class g.i. pipe.the frame is powder coated to give an aesthetic look.the swing is made up of 5mm thick anti skid canvas top. the rubber belt seat is suspended on 6mm rubber coated gi chain. the ball bearings shall be mounted inside a specially designed nylon clamp., deluxeslide:deluxe slide chute is made from stainless steel (ss) of 304 grade swith 16 swg sheet.the structure comprises of 20 mm nb and 25 mm nb b class g.i. pipe. the centre support is made in 80 mm nb b class g.i. pipe and 15 mm nb g.i. pipe.the ladder cum railing is made up of 20 mm nb and 25 mm nb b class gi pipe. the platform is made up of 14 swga luminium sheet swith an tiskid for firm foot grip.there are train gular steps of 16 swg sheets. the chute has its end such as it causes safe landing of the child.the pipe sare powder coated to avoid rusting., frp wave slide :providing and fixing of frp wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5 ground level and should be made by 32 mm nb and 25 nb and 20 mm nb pipe ms pipe.slide length10 all components paint by pu paint in multi colours., doubleseesaw: providing and fixing of double see saw of height 0.5 mtr from ground level.seat frame and base should be made with 50 mm nb b class g.i. pipe. handle pipe should be 25 mm nb b class g.i.pipe.length of see saw lever should be 6 feet. seats are made with frp/lldpe. max. 4 children can play at one time., spiral slide : the chute of the spiral slide is made of frp (fibre reinforced plastic) having thickness of 4mm. slide centre support shall be 80mm nb b class gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform is made from frp(fibre reinforced plastic). the laddermain frame is 25 mm gi pipe.the railing shall be made from15 mm nb and 20 mm nb b class gi pipe. all pipes are powder coated to avoid rusting.

CTN :43499326

19 Jan, 2026 64.29 Lacs

Jaipur - Rajasthan

Tender For work of installing sports equipment in various parks of jagatpura and malviya nagar zone. (arc) - double arch swing: in this two children can enjoy the swing at one time.the arch shaped side frame is made of 65mm nb b class gi pipe and top pipe is made up of 50mm nb b class g.i. pipe.the frame is powder coated to give an aesthetic look.the swing is made up of 5mm thick anti skid canvas top. the rubber belt seat is suspended on 6mm rubber coated gi chain. the ball bearings shall be mounted inside a specially designed nylon clamp., deluxeslide:deluxe slide chute is made from stainless steel (ss) of 304 grade swith 16 swg sheet.the structure comprises of 20 mm nb and 25 mm nb b class g.i. pipe. the centre support is made in 80 mm nb b class g.i. pipe and 15 mm nb g.i. pipe.the ladder cum railing is made up of 20 mm nb and 25 mm nb b class gi pipe. the platform is made up of 14 swga luminium sheet swith an tiskid for firm foot grip.there are train gular steps of 16 swg sheets. the chute has its end such as it causes safe landing of the child.the pipe sare powder coated to avoid rusting., frp wave slide :providing and fixing of frp wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5 ground level and should be made by 32 mm nb and 25 nb and 20 mm nb pipe ms pipe.slide length10 all components paint by pu paint in multi colours., doubleseesaw: providing and fixing of double see saw of height 0.5 mtr from ground level.seat frame and base should be made with 50 mm nb b class g.i. pipe. handle pipe should be 25 mm nb b class g.i.pipe.length of see saw lever should be 6 feet. seats are made with frp/lldpe. max. 4 children can play at one time., spiral slide : the chute of the spiral slide is made of frp (fibre reinforced plastic) having thickness of 4mm. slide centre support shall be 80mm nb b class gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform is made from frp(fibre reinforced plastic). the laddermain frame is 25 mm gi pipe.the railing shall be made from15 mm nb and 20 mm nb b class gi pipe. all pipes are powder coated to avoid rusting.

CTN :43414033

15 Jan, 2026 10.09 Lacs

Thiruvananthapuram - Kerala

Tender For construction of madakkathara grama panchayath stadium in ollur lac, thrissur- supply and installation of outdoor gym equipment - open gym equipment, od263824/2025-2026 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material.foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263826/2025-2026: air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin's ø 25mm m.s. bright bar pin. circlips- a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263830/2025-2026 : leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is ø 60 mm od “b” class gi pipe. seat frame - ø 42 mm od “b” class gi pipe. leg press back rest should be angled in 120 - 130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest – 380 x 275 x 60 mm thick high- density polyethylene (hdpe) blow molded with m

Central Government/Public Sector

CTN :43232672

13 Jan, 2026 7.95 Lacs

Daman - Gujarat

Tender For bid to ras providing of custom bid for services - all inclusive annual maintenance contract of ground support equipment (gse) and tool of air engineering department

CTN :42854306

19 Jan, 2026 166.87 Crore

Mumbai - Maharashtra

Tender For corrigendum : providing of leasing in of assets - wet lease (maintenance to be borne by lessor); ground support equipment; electric low floor airport passenger bus & fast charger; electric low floor airport passenger bus & fast charger; new; not applicable, new; not applicable..

CTN :43450793

15 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of goods and transport service for over dimensional cargo (odc) - ground support equipment - aircraft pushback tractor, qty-01; any trailer suitable to transport ground support equipment, aircraft pushback tractor, qty- 01 as per dimensions mentioned in..

CTN :43451070

15 Jan, 2026 NA

Kanchipuram - Tamil Nadu

Tender For providing of goods and transport service for over dimensional cargo (odc) - ground support equipment - aircraft pushback tractor, qty-01; any trailer suitable to transport ground support equipment, aircraft pushback tractor, qty-01 as per dimensions mentioned in ..

CTN :43389601

15 Jan, 2026 NA

Kochi - Kerala

Tender For expression of interest is invited from reputed agencies for the project of implementation of the aircraft and vehicle / gse (ground support equipment) tracking system at cochin international airport ltd (cial). the scope of the work covers supply, installation, testing, and commissioning of the aircraft and vehicle/gse (ground support equipment) tracking system.

Bagasse Handling Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector